cars






 

Question by  christa (24)

What is the location of the torque converter on a Dodge Ram?

 
+7

Answer by  jstuhl (83)

The torque converter on any car is located between the transmission and the engine. First the transmission has to be removed as well as the flywheel. Once the trans is out, you'll see the torque converter inside the bell housing. Remove it from the trans spindle and replace all components.

 
+7

Answer by  Me30mike (58)

The torque converter in a Dodge Ram as in any car, is located in the transmission. The transmission will need to be removed from the car in order to see it. Once the transmission is removed from the car you will be able to slide the torque converter out of the unit.

 
+6

Answer by  Amber40 (24961)

The torque converter is located in the same spot on all automatic cars. It is the drive train link between the engines flywheel and the transmission. This means it is always located at the back of the block beneath the transmission's bell housing. To access it you will have to go up from the bottom.

 
+6

Answer by  Allstar (2071)

Same place as every other rear wheel drive car: inside the bell housing (that resembles the clutch housing of a stick shift) in between the engine and transmission.

 
+6

Answer by  Ralphie1954 (420)

You will always find the torque converter located between the engine and transmission as it is the fluid coupling between the engine and transmission. In order to see the torque converter you need to remove the inspection plate located on the bellhousing on the transmission. To remove the torque converter you will have to separate the engine from the transmission.

 
+6

Answer by  Amber40 (24961)

The torque converter is located behind the engine bolted to the flywheel and in front of the transmission. It is a mechanical device that can multiple the engines torque and transfers the engines power to the input shaft of the transmission.

 
+5

Answer by  dupont24 (42)

The torque converter on this vechicle which should be rear wheel drive is located between the engine and transmission.This converter should simply bolt to the flywheel at the rear of the engine.

 
+5

Answer by  TyrellGreen (102)

The location for the torque converter on a Dodge Ram is located in the transmission. You have to remove the transmission to see it so if there is a problem that's what you do to fix it.

 
+4

Answer by  Ralphie1954 (420)

Your torque converter is a hydralic coupling between your engine and transmission. Therefore it is located between your engine and transmission hidden behind what looks like a bell housing.

 
+3

Answer by  seba (35)

The torque converter on a Dodge Ram is inside the housing. Plug in the motor and gearbox. Thanks a lot

 
You have 50 words left!