How do you pull the transmission of a Ford F150?

Answer by  GIants (23)

First you would need to jack up the truck to allow yourself room to remove the transmission. After placing jacks safely under the truck, loosen the pan bolts. Then empty the transmission fluid, Disconnect the drive shaft, then you should be able to remove the actual transmission from the truck.

Answer by  jpena001 (19)

Remove the driveshaft, remove the shifter, remove the fluid from the transmission, temove the slave cylinder from the bellhousing. Place jack under transmission. Remove the crossmember that supports the transmission, remove the bolts holding the transmission to the engine block, slide out and lower the transmission with the jack.

Answer by  Doug77 (1433)

Remove the boot and then the bolt holding the shifter to the transmission. Remove the clutch lever/hydraulic actuator underneath. Remove the driveshaft and support beam (supporting the engine and transmission with separate jacks). Remove the 6 bolts holding the transmission to the engine block. Pull the transmission back and down.