How do I clean the filter in my Kelvinator Wall-mounted air conditioner?

Answer by  coppo (70)

At the bottom of the vent cover, you can find two screws. Unscrew them to take the filter out for cleaning. If you look at the bottom of the vented cover, you'll find two recessed Phillips head screws. Remove these screws and the cover will pitch away from the unit.

Answer by  les59 (852)

You should be able to open it with a screw driver and pull out the filter for cleaning purposes. Depending on the age of the unit this compartment may have gotten corroded shut. If that is the case, it is probably best to go out and buy a new AC unit so that you don't keep having issues.

Answer by  kipcat (1964)

Likely, you must look to the bottom of the vented cover and you will find two recessed phillips head screws. Remove these screws and the cover will pitch away from the unit.

Answer by  jijo67 (112)

You can find at the bottom of the vent cover two screws. Unscrew the screws to take the filter unit outside for cleaning.